TM 5-3610-286-10
2-7.
OPERATING PROCEDURES
b.
Prepare Paper Cycle
(CONT)
(Cont)
NOTE
The double sheet detector must be adjusted to pass
three sheets and prevent the passage of four sheets.
(d) Insert three thicknesses of paper below lower detector
wheel (1).
(e) Turn knurled adjustment
wheel (1) until feeder disengages.
(f) Turn knurled adjustment
detector wheel (1).
knob (2) to left to lower detector
knob (2) 1/4 turn to right to raise
(g) Repeat steps (c) through (f) above until double sheet
detector (3) permits three thicknesses of paper to pass under detector
wheel with feeder engaged.
(h) Insert four thicknesses of paper under detector wheel. Feeder
must disengage.
(i) Put Printing Press on safe.
2-39