TM 5-3610-286-10
2-7.
OPERATING PROCEDURES (CONT)
b.
Prepare Paper Cycle (Cont)
NOTE
The electronic sheet detector has two positions.
When the control knob is turned to
s
, the center
light is activated for sheets smaller than 29-1/2 in.
(74.93 cm).
When the control knob is turned to
l
,
the two outside lights are activated for sheets
larger than 29-1/2 in. (74.93 cm). This setting may
vary if pile is shifted to one side or the other.
(j) Set control knob (1) for appropriate sheet size.
(4) Prepare Register Mechanism
(a) Turn microadjustment ratchet ring (1) to center
microadjustment.
(b) Press and turn disengaging knob (2) 90 degrees to lock pulling
wheel and guide plate in up position.
(c) Loosen thumbscrew (3) to unlock side guide (4) and move side
guide to same setting as on scale at side standard. Tighten thumbscrew.
2-40
