TM 5-3610-286-10
2-7.
OPERATING PROCEDURES (CONT)
g.
Perform Washup Procedures (Cont)
WARNING
l
EXPOSED MOVING PARTS.
Do not inch Printing Press and wipe
cylinder at the same time.
Return Printing Press to SAFETY
STOP after each inching.
Failure to do so may result in
serious injury.
l
EXPOSED MOVING PARTS.
Remove all jewelry. Keep shirts
tucked in, sleeves above elbows, and ties removed.
Failure
to observe these precautions while operating Printing Press
(1) Remove unused ink from ink fountain (1) and discard.
(2) Unlock star-shaped locking handles (2) and lower ink fountain.
(3) Clean ink fountain with rag and lithographic solvent.
(4) Turn ink supply lever to right (off) to disengage ductor roller
no. 18 from fountain roller no. 19.
(5) Clean fountain roller no. 19 with rag and lithographic solvent.
2-99
