TM 5-3610-253-14
m.
Barely loosen the screw so that slow bleeding occurs. Do not allow
fluid to enter control panel and wires.
Keep hands clear of piston when operating the foot pedal. The piston
will raise and injury may occur.
n.
Press down on the clamp foot pedal and hold.
o.
piston in the out position until it is free of air bubbles.
Retighten the bleeding screw.
p.
WARNING
Before releasing the clamp foot pedal, be sure all objects are clear of
piston and angle linkage. Serious injury may occur.
Release the clamp foot pedal.
q.
Rotate piston so that the bleeding screw is back in its original
r.
position.
While performing a cutting cycle, loosen the bleeding bolt on the
s.
backside of the clutch assembly during the knife downstroke to bleed
5-646