TM 5-3610-253-14
f. Press in the clamp pressure adjustment knob. Perform several clamping
operations using the foot pedal. If the guiding of the clamp is still
too stiff, continue, if not go to step l.
Add foils behind the guiding plate until the clamp moves freely without
g.
play.
h. Adjust the side ledge by loosening the fixing screw and rotating the
adjusting screw, then tighten the fixing screw.
Perform several clamping operations using the foot pedal. Check for drag
i.
marks on the clamp surface along the side ledge. If present, add foils
behind the side ledge.
If foils were added, continue or go to step l.
j.
k. Check the clearance between the knife and the clamp by performing
procedure 5-40.17.
l.
Turn off power.
(1) Turn Star-Delta switch to Y position, then to O position.
(2) Turn main power switch to O position.
5-643
