TM 5-3610-253-14
Using new O-rings, install new pump onto base plate.
j.
Using new gasket and copper washers, install new pump into reservoir.
k.
Reinstall pump filter and reconnect pipes to pump.
l.
Reinstall the hydraulic pump pulley.
m.
Reinstall the main motor V-belt (paragraph 5-36.4).
n.
o.
Fill the reservoir with 17 liters (4.5 gallons) of hydraulic fluid.
Manually rotate the main motor to the right several times to lubricate
p.
the hydraulic fluid pump.
Reinstall the access plate above the pump.
q.
Reinstall the main motor V-belt cover.
r.
Bleed the hydraulic system (paragraph 5-40.65).
s.
5-40.25 Service Hydraulic Fluid Filters.
83FJ6, Reproduction Equipment Repairer
MOS:
Flat Tip Screwdriver
TOOLS:
13 mm Socket with 3/8 in. Drive
3/8 in. Drive Ratchet
22 mm Combination Wrench
SUPPLIES: Small Fluid Filter
Large Fluid Filter
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
Turn off power.
a.
(1) Turn Star-Delta switch to Y position, then to O position.
(2) Turn main power switch to O position.
(3) Using operator key, lock safety lock and keep key in your
b. Remove main motor V-belt cover.
Remove front electronics enclosure cover.
c.
5-559
