TM 5-3610-253-14
WARNING
Serious injury may occur if an inadequate number of personnel are used to
move the backgauge table and side wall. This equipment weighs 1050 lbs.
NOTE
All nails have to be removed by pliers or nail puller before the side
walls can be removed from the wooden crate.
(7) Lift the hoist and remove the backgauge table and side wall from the
crate.
(8) Remove nuts and bolts on side wall that are securing table to side wall.
Then remove side wall.
(9) Remove two short side walls.
(10) Remove backgauge from crate.
(11) Carefully set the backgauge table down flat onto floor so that the table
rests on the wooden blocks attached to table.
(12) Fix hoist to main frame and apply tension on the hoist.
(13) Remove nuts on the frame pillars and push down the bolts.
WARNING
Serious injury may occur if an inadequate number of personnel are used to
move the paper cutter. This equipment weighs 3600 lbs.
5-382
