TM 5-3610-253-14
Table 5-17. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
(Number) - Hundreds of Hours
W - Weekly
AN - Annually
B - Before
M - Monthly
S
- Semiannually
D - During
A - After
B I - Biennially
Q - Quarterly
For Readiness
ITEM TO BE INSPECTED
IN-
Reporting,
ITEM
Equipment Is
TER-
PROCEDURE
NO.
Not Ready/
VAL
Available If:
PAPER CUTTER - Cont
4
B
Inspect Cutting Buttons - Cont
NOTE
Knife must stop at upper deadpoint and cutting
buttons must be released before another cut can
be performed.
Knife does not
5. Release both cutting buttons and press again.
stop at
upper dead-
point.
6. Turn off power.
a.
Turn Star-Delta switch to Y position,
then to O position.
b. Turn main power switch to O position.
c.
Lock the safety lock with the operator key.
5-345
