TM 5-3610-253-14
Table 5-17. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
AN - Annually
B - Before
W - Weekly
(Number) - Hundreds of Hours
S
- Semiannually
M - Monthly
D - During
BI - Biennially
A - After
Q - Quarterly
For Readiness
ITEM
TO
BE
INSPECTED
IN-
Reporting,
ITEM
TER-
Equipment Is
PROCEDURE
NO.
VAL
Not Ready/
Available If:
PAPER CUTTER - Cont
1
B
Inspect Paper Cutter - Cont
6.
False clamp
Check false clamp for proper insertion in
either its holder under front of table or
is not pro-
installed in clamp.
perly in-
serted.
7. Turn off paper cutter.
a.
Turn Star-Delta switch to Y position,
then to O position.
b. Turn main power switch to O
position.
c.
Lock safety lock with operator key.
2
Clean Paper Cutter.
B
WARNING
Dry cleaning solvent, P-D-680, used to clean
parts, is potentially dangerous to personnel
and property. Avoid repeated and prolonged
skin contact. Wear solvent impermeable gloves
and eye/face protective equipment when using
solvent. Do not use near open flame or ex-
cessive heat. Flash point of solvent is
100F to 138F (38C to 59C)
1.
Clean work surface with solvent-soaked cheese-
cloth and coat with wax.
Clean light barrier emitter and collector lenses
2.
with lens tissue and cleaner.
5-340
