TM 5-3610-253-14
Table 5-17. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
(Number) - Hundreds of Hours
AN - Annually
W - Weekly
B - Before
S
- Semiannually
M - Monthly
D - During
BI - Biennially
Q - Quarterly
A - After
For Readiness
ITEM TO BE INSPECTED
Reporting,
IN-
ITEM
Equipment is
TER-
PROCEDURE
NO.
Not Ready/
VAL
Available If:
PAPER CUTTER - Cont
Inspect Backgauge and Measurement Display - Cont
B
7
Backgauge
Press button in center of backgauge control knob.
3.
does not
Backgauge should move rearward and stop auto-
stop, or
matically when travel limit is reached. Measure-
measurement
ment display should indicate a "+" and the measure-
does not in-
ment increases.
dicate a "+"
and increase
in value.
Remove false clamp from its holder under table and
4.
install on clamp.
Backgauge con-
Pull backgauge control knob outward. Backgauge
5.
tacts clamp,
should move forward, stopping automatically just
or measure-
short of clamp. Measurement display should indicate
ment display
a "-" and the measurement should decrease.
does not in-
dicate a "-"
and decrease
in value.
5-350
