TM 5-3610-253-14
Table 5-17. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
B - Before
W - Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S
- Semiannually
A - After
Q - Quarterly
BI - Biennially
For Readiness
ITEM TO BE INSPECTED
IN-
Reporting,
ITEM
TER-
Equipment Is
NO.
PROCEDURE
VAL
Not Ready/
Available If:
--
PAPER CUTTER - Cont
5
B
Check Drive Gear Oil Level.
1.
Check gear oil sight gage on rear of drive gear
Gear oil not
housing. Fluid should be visible in gage.
visible in
sight gage.
6
B
Check Light Barrier.
1. Turn on power.
a.
Unlock safety lock with operator key.
b. Turn main power switch to I position.
c.
Turn Star-Delta switch to Y position.
After main drive motor is at full speed,
turn switch to
position.
d. Press control power on switch.
5-346
