TM 5-3610-253-14
(Number) - Hundreds of Hours
AN - Annually
W - Weekly
B - Before
- Semiannually
S
M - Monthly
D - During
B I - Biennially
Q - Quarterly
A - After
For Readiness
ITEM TO BE INSPECTED
Reporting,
IN-
ITEM
Equipment Is
TER-
PROCEDURE
NO.
Not Ready/
VAL
Available If:
PAPER CUTTER - Cont
Check Knife Cut and Cutting Stick - Cont
3
B
WARNING
Be sure personnel and foreign materials
are clear of the cutting and clamping
area before pressing the cutting buttons.
Death or serious injury may occur.
Press both cutting buttons and perform a cut.
4.
5.
Check each sheet for complete, even cut. If
one or more sheets are not cut completely through,
check cutting stick, and rotate if necessary.
Make another cut, and if one or more sheets
6.
are still not cut through, adjust the knife.
Sheets are
Lay several new sheets of paper across cutting
7.
not cut
line and perform another cut.
completely
through.
Turn off power.
8.
Turn Star-Delta switch to Y position,
a.
then to O position.
b. Turn main power switch to O position.
c.
Lock the safety lock with the operator key.
5-342
