TM 5-3610-253-14
Table 5-17. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
(Number) - Hundreds of Hours
AN - Annually
W - Weekly
B - Before
- Semiannually
S
M - Monthly
D - During
BI - Biennially
Q - Quarterly
A - After
For Readiness
ITEM TO BE INSPECTED
Reporting,
IN-
ITEM
Equipment Is
TER-
PROCEDURE
NO.
Not Ready/
VAL
Available If:
PAPER CUTTER - Cont
4
B
Inspect Cutting Buttons - Cont
b. Turn main power switch to I position.
c.
Turn Star-Delta switch to Y position.
After main drive motor is at full speed,
turn switch to
position.
d. Press control power on switch.
Move backgauge forward or backward as necessary
2.
until backgauge position is displayed on
measurement display.
WARNING
Be sure personnel and foreign materials
are clear of the cutting and clamping
area before pressing the cutting buttons.
Death or serious injury may occur.
One cutting
Press cutting buttons separately, then together.
3.
button acti-
vates cut.
NOTE
Only one cut should be performed if buttons
are pressed continually.
Multiple cuts
Press both cutting buttons and hold.
4.
are performed
without re-
leasing cut-
ting buttons.
5-344
