TM 5-3610-253-14
m.
Repeat steps d. through l. until properly adjusted.
n.
Secure adjusting screws by tightening setscrews.
o.
Loosen setscrew on adjustment screw knob.
Rotate knob so that zero marking is alined with
mark on the
p.
backgauge.
Tighten setscrew on adjustment knob.
q.
r.
Position adjustment screw handle up to prevent it from coming in
contact with back ledge of table by pulling it outward and rotating to
the left.
s.
Turn off power.
(1) Turn main power switch to 0 position.
(2) Using operator key, lock the safety lock.
t.
Turn off the circuit breaker.
5-195