TM 5-3610-53-14
(7) Install new switch in switch housing and secure with bezel nut.
(8) Reinstall switch housing and secure with screws.
(9) Reinstall cable hold down and secure with screw.
(10) Reinstall fluorescent lamp.
(11) Place operator key back into safety lock.
c. To replace capacitor, proceed as follows:
(1) Remove toggle switch.
Perform steps b(1) through b(4).
(2) Tag and disconnect capacitor wires from switch.
(3) Remove capacitor retaining nut and defective capacitor.
(4) Install new capacitor and secure with retaining nut.
(5) Reconnect wiring to switch.
(6) Reinstall toggle switch. See steps b(7) through b(11).
d. To replace lamp ballast, proceed as follows:
(1) Remove left pillar cover.
5-192
