TM 5-3610-253-14
r.
Loosen locknuts on connecting rod.
By turning the turnbuckle, adjust th e knife carrier to position which
s.
allows the gage indicating pin to al ine with the boring hole.
t. Tighten locknuts on connecting rod.
Raise the knife carrier by pressing both cutting buttons.
u.
WARNING
Use extreme care when handling the knife. The knife is extremely sharp
and death or serious injury may occur from failure to observe this
warning.
w.
Using knife carrying handles, place knife onto the knife suspending
bolts.
x.
Raise the knife holding device.
5-169
