TM 5-3610-253-14
Table 58. ORGANIZATIONAL TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6. ROUGH AND FUSED TOGETHER CUTS.
Check to see if knife is blunt.
(a) If knife is blunt, replace knife (paragraph 5-16.13).
(b) If malfunction persists, refer to direct/general support
maintenance.
7. WARPED CUTS.
Check knife for burrs and knife position in carrier.
(a) If knife has burrs, replace knife (paragraph 5-16.13).
(b) If knife is not properly positioned in knife carrier,
reposition knife (paragraph 5-16.13).
8.
NOTCHED CUTS .
Check knife for chips and/or nicks.
(a) If knife is chipped or nicked, replace knife (paragraph
(b) If malfunction persists, refer to direct/general support
maintenance.
