TM 5-3610-253-14
Table 5-8. ORGANIZATIONAL TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
13. CLAMP IS RETURNING TOO SLOWLY OR NOT AT ALL.
Check clamp return spring tension.
(a)
If tension is out of adjustment, adjust clamp return spring
(b)
If adjustment does not correct problem or return spring is
broken, replace clamp return spring (paragraph 5-16.11).
14. CLAMP HESITATES BEFORE GOING DOWN.
Check for loose nut on linkage adjustment turnbuckle.
Step 1.
(a) If nut is loose, tighten locknut.
(b) If nut is not loose, proceed to step 2.
