TM 5-3610-253-14
Table 5-8. ORGANIZATIONAL TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
9. CLAMP DOES NOT DESCEND COMPLETELY WHEN USING FOOT PEDAL - Cont
(a) If out of adjustment, perform foot pedal adjustments
(paragraph 5-16.12 step h).
(b) If problem persists, proceed to step 3.
Check return spring for proper tension.
Step 3.
(a) If spring tension is improper, perform return spring
adjustments (paragraph 5-16.11, step m).
(b) If malfunction persists, refer to direct/general support
maintenance.
10.
CLAMP MOVES DOWN TOO SLOWLY DURING CUTTING CYCLE.
Check for loose or leaky connections in the hydraulic system.
(a) If loose or leaky, retighten connections.
(b) If malfunction persists, refer to direct/general support
maintenance.
