TM 5-3610-253-14
Table
3-6.
ORGANIZATIONAL
TROUBLESHOOTING
-
Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. CLUTCH BRAKE JAMS AND STALLS INPUT MOTOR - Cont
Step 2.
Check clutch output for binding.
5. STITCHER HEAD STOPS IN DIFFERENT PLACES OR DOES NOT RETURN TO DESIRED
POSITION.
Check for spring tab broken off.
Step 1.
(a) If spring tab not broken, proceed to step 2.
Step 2.
Check if lock screw on adjustable collar is loose.
If loose, adjust control collar and tighten lock screw
MAINTENANCE PROCEDURES.
This section contains instructions covering organizational maintenance
functions for the paper stitcher. Personnel required are listed only if the task
requires more than one.
b. After completing each maintenance procedure, perform operational check to be
sure that equipment is properly functioning.
3-45