Table 3-6 Parts Required for Transfer to UH-60 Helicopter

ARMY TM 9-6675-349-12&P

MARINE CORPS TM 11039A-12&P

Table 3-6 Parts Required for Transfer to UH-60 Helicopter

Item

Purpose

Quantity

Part Number

UH-60 Indexer

Mounts CDU mount to IPADS frame.

7170186-9

UH-60 Power Cable

Connects IPADS to aircraft power.

7204116-2

Belt Assembly

Secure IPADS frame to aircraft.

CGU-1-B Class 2

CDU Mount Assembly

Attaches CDU to INDEXER

7204149-9

Cable Ties

Secures power cable to seats and overhead tube

MS3367-2-0

Plumb Bob Bracket

Supports plumb bob

7170187-1

Upper Stop Bracket

Vertical plumb bob bracket support

7170189-1

Lower Stop Bracket

Horizontal plumb bob bracket support

7170188-1

Prepare helicopter for IPADS transfer.

(1) IPADS operator will request the crew chief remove and stow two seat sections indicated in Figure 3-9.

Figure 3-9 UH-60 Cockpit and Troop Compartment Layout

(2) Verify with UH-60 crew chief that power is applied in aircraft.

(3) Before starting installation procedures ensure the UH-60 APU is running.

(4) Verify with crew chief that UTILITY RECP 7.5 AMP circuit breaker is off. This is located on the #1

primary DC bus circuit breaker panel.

(5) Plug in headset to communicate with crew.