ARMY TM 9-6675-349-12&P
MARINE CORPS TM 11039A-12&P
3-31. Waypoint Navigation - Continued
(2) Perform the following steps to select an existing point from database list:
(a) Point filter sets the type of points shown on POINT LIST page. Point filter type is displayed in
fourth field of mode line and on POINT LIST page. Set point filter type by pressing F4 until
desired point filter type is displayed.
Filter
Mode
POINT LIST Page
Description
Type
Line
All unadjusted IPADS points established during current
Mission
FL:MISN
MISSION FILTER
mission.
Unadjusted IPADS SCP (OS) before closure; Adjusted
SCP
FL:SCP
ALL SCP
IPADS SCP (OS) after closure adjustment.
Waypoint
FL:WAY
ALL WAY PTS
Navigation way points entered by operator.
Unadjusted IPADS mark points (EOL) before closure;
Mark
FL:MARK
ALL MARKED PTS
adjusted IPADS mark points (EOL) after closure adjustment.
User
Unadjusted IPADS SCP (OS) and mark points (EOL) after
FL:USER
ALL USERDEF
Defined
closure adjustment.
All Points
FL:ALL
ALL POINTS
All points in IPADS database.
(b) Scroll to desired navigation waypoint (e.g. RAILROAD CROSS) and press F3.
(3) Perform the following steps to enter coordinates for a new point:
(a) Press F2. POINT EDITOR page is displayed with cursor box on TYPE field and function key line
F1-USER, F2-WAY, F3-SCP, and F9-EXIT.
(b) Press F1 for user defined point type, F2 for waypoint, or F3 for SCP. Selected point type is
displayed. Cursor box moves to PNT NAME field. Function key line shows F2-USE ALL and
F9-EXIT.
3-74
