ARMY TM 9-6675-349-12&P
MARINE CORPS TM 11039A-12&P
NOTE
Only SCPs may be sent to FOS. MARK, USER DEF, and WAYPOINTS may
not be sent
(2) Point filter sets the type of points shown on POINT LIST page. Point filter type is displayed in fourth
field of mode line and on POINT LIST page. Set point filter type by pressing F4 until SCP point filter
type is displayed.
Filter Type
Mode Line
POINT LIST Page
Description
All unadjusted IPADS points established during current
Mission
FL:MISN
MISSION FILTER
mission.
Unadjusted IPADS SCP (OS) before closure; Adjusted
SCP
FL:SCP
ALL SCP
IPADS SCP (OS) after closure adjustment.
Waypoint
FL:WAY
ALL WAY PTS
Navigation waypoints entered by operator.
Unadjusted IPADS mark points (EOL) before closure;
Mark
FL:MARK
ALL MARKED PTS
Adjusted IPADS mark points (EOL) after closure
adjustment.
User
Unadjusted IPADS SCP (OS) and mark points (EOL) after
FL:USER
ALL USERDEF
Defined
closure adjustment.
All Points
FL:ALL
ALL POINTS
All points in IPADS database.
(3) To send a single point, scroll to the point and press F6 (SND PNT). POINT LIST page is displayed
with INFO: xxxx SENT TO FOS on information line, where xxxx is the name of the point. Verify that
FOS received the point per instructions in the FOS operator's manual
TB 7021-228-10-1 or 2, depending on the platform.
(4) To send the full list of SCPs to FOS, press F7 (SND ALL). POINT LIST page is displayed with
INFO: SEND ALL POINTS: NN SECONDS REMAINING: PRESS F9 TO CANCEL on information
line, and
F9-CANCEL on function key legend, where NN is the number of seconds remaining for transmission
to complete.
(a) Pressing F9 terminates the send operation. POINT LIST page is displayed with INFO: SEND
ALL POINTS TO FOS CANCELED on information line.
(b) The POINT LIST page is displayed with INFO: NN SURVEY CONTROL POINTS SENT TO
FOS on information line upon completion of the send all operation, where NN is the number of
points sent to the FOS. Verify that FOS received the points per instructions in the FOS operator's
manual TB 7021-228-10-1 or 2, depending on the platform.
(5) Press F9 to display previous page.
(6) To transmit a trig list to IPADS, follow instructions in the FOS operator's manual,
TB 11-7021-228-10-1 or 2, depending on the platform.
NOTE
The POINT LIST page will display INFO: FOS DATA RECEIVED on the
information line if the POINT LIST page is active. Otherwise INFO: FOS
DATA RECEIVED will be displayed the next time the POINT LIST page is
activated.
3-69
