ARMY TM 9-6675-349-12&P
MARINE CORPS TM 11039A-12&P
3-28. Data Management - Continued
d.
Perform the following steps to delete all points in the displayed list:
(1) Press F5. IPADS prompts PRESS Y TO DELETE DISPLAYED POINTS; PRESS OTHER KEY TO
CANCEL.
(2) Press Y to permanently delete all points in displayed list. Press any other key to cancel delete.
e.
Perform the following steps to view data for a point in displayed list:
(1) Scroll to point to be displayed.
(2) Press ENTER. POINT EDITOR page is displayed for selected point. For example, STATION AZ is
selected from SCP list.
(3) Press F9 to return to POINT LIST page.
NOTE
Point name, mark identifier(s) and point description for a stored point may
be edited. No other fields may be changed. If coordinates for an operator
entered point are incorrect, the point must be deleted, paragraph 3-28c, and
correct data entered as a new point, paragraph 3-13f(5).
PNT NAME and DESCRIPTION fields will always be displayed on POINT
EDITOR page. AZIMUTH field(s) will be displayed only if IPADS
determined azimuth(s) for that point.
f.
Perform the following steps to edit data for a point in displayed list:
(1) Scroll to point to be displayed.
(2) Press ENTER. POINT EDITOR page is displayed for selected point with cursor box on PNT NAME
field.
(3) Scroll to field(s) to be changed, press FNC DEL to clear field, and enter new name or description.
(4) When all desired fields are changed, press F2. INFO: POINT WAS SUCCESSFULLY MODIFIED is
displayed.
(5) If data are correct, press F9 to return to POINT LIST page. Otherwise, scroll to incorrect field and
enter correct data, paragraph 3-28g.
3-66
