TM 5-6675-316-14
(h) Adjust drag knobs on reel brackets until film tension is suitable
for operator’s use.
(i) Move rollers to far left and right travel positions, and tighten
locking knobs.
CAUTION
Do not close stage separation. Damage to film may result.
1.
Install clipboard over viewing surfaces, if desired.
4-6.2 Operating Procedures.
a.
Adjust light grid intensity to comfortable illumination level.
b.
Position optics at approximate viewing level:
(1) Rotate Z-axis coarse feed knob to left or right.
(2) Rotate Z-axis fine feed knob to obtain operating position.
4-33
