TM 5-6675-316-14
CAUTION
Do not close view stages when film is threaded in long loop position.
Damage to film may result.
(a) Push stage separator knob down and to the left. Make sure that view
stages separate.
(b) Remove center accumulator roller by pinching spring loaded latches
and lifting from between view stages.
(c) Insert film supply reel between front bracket and center idler
bracket.
Front bracket drive spindle engages key slot on reel.
(d) Loosen black knurled locking knob on center idler bracket. Move
bracket toward film reel, and engage bearing on bracket with center hole in reel.
Adjust position so that film reel is securely held and has very slight end-play.
(e) Tighten black knurled locking knob on center idler bracket.
(f) Install take-up reel at opposite end of table using same proc edure.
(g) Loosen black plastic knobs on film accumulator cover, and let cover
drop down.
4-30