TM 5-6675-316-14
(2) Short loop take-up threading.
After film is threaded
a short loop take-up.
(a) Push stage
view stages separate.
NOTE
conventionally, the following steps will provide
separation knob down and to the left. Make sure that
(b) Loosen drag brake knobs on reel brackets.
(c) Start short film loop.
(d) Insert center accumulator roller over film between view stages.
Pinch spring-loaded latches and latch into position.
(e) Adjust drag brake tension on reel brackets until film tension is
suitable for operator’s use.
(3) Long loop take-up threading.
4-29
