TM 5-6675-316-14
c.
Position optics to approximate horizontal position:
(1) Press momentary switch and hold.
(2) Move mount left, right, forward, or back while switch is pressed.
(3) Use X-axis control knob for fine positioning in left-right direction.
(4) Use Y-axis control knob for fine positioning in front-back direction.
d. Shut down light table.
(1) Rewind film on reel.
(2) Remove film reels.
(3) Set ON/OFF switch to OFF.
(4) Set carriage clutch switch to OFF.
(5) Set main power switch to OFF.
(6) Cover view stages with masking assemblies.
(7) Unplug power cord.
4-34