TM 5-6675-316-14Table 3-8. OPERATOR’S CONSOLE OPERATION (OP) CODESCodeMeaning and UseSLOJOG FUNCTIONSSlow speed set for machine movement.MEDMedium speed set for machine movement.FASFast speed set for machine movement,STPStep movement each time arrow key is pressed.NOTEMachine will continue to operate at selected speed until reset or changed.MAUMADAUUAUDCONSCAPREPEN FUNCTIONSManual override, pen up. Overrides any tape program commands and raises pen.Manual override, pen down. Overrides any tape program commands and lowers penAutomatic up. Pen raises until console or tape program command says to lower,Automatic down. Pen lowers until commanded to raise.VARIA FUNCTIONSConsole Command. Enables manual input of tape program drafting commands. Commandsare entered after pressing CR.Scale command. Enable operator to set scale of machine and XY Display CPU with console.Scale is entered after pressing CR. (10,000 = 1:1).Preset command. Used to enter preset value for 0 (origin) reference point on machine. Valueis entered after pressing CR.NOTEEvery entry, after VARIA command is selected, is ended by pressing CR.Change 13-113
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
