TM 5-3610-287-24
REPAIR BLACKOUT LIGHT SYSTEM (CONT)
2-52.
8.
Snap bulb socket (5) into bulb socket bracket (7).
9.
Position bulb socket bracket (7) over screw (6) and slip into
position. Secure bracket (7) with screw (6).
10.
Install light bulb (4).
Position foam gasket (3) on blackout light cover (2) and align holes.
11.
Install blackout light cover (2) with thumbscrews (1).
12.
To test operate, set BLACKOUT LIGHTS switch to ON (up) position. Then
13.
set BLACKOUT BYPASS switch to OFF (down) position and open personnel
door.
MARKER LIGHT
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Flat-tip screwdriver
Cross-tip screwdriver
Pliers
Materials/Parts
Marker light, 77-556
Wire nut, 2978 (2 required)
2-163
