TM 5-3610-287-24
REPAIR BLACKOUT LIGHT SYSTEM (CONT)
2-52.
WARNING
ELECTRICAL HAZARD. Turn off main power switch before
replacing door switch. Failure to do so may result in death
or serious injury.
1.
Set MAIN POWER switch to OFF.
Remove screws (1) securing door switch plate (2) to personnel door
2.
jamb.
Using needle-nose pliers, remove retaining nut (3) securing switch (4)
3.
to switch plate (2). Remove switch plate (2).
Cut two wires (5) above electrical splice (6) and remove switch.
4.
Strip ends of wires (5) approximately 1/2 inch (1.3 cm) back from cut.
5*
Connect wires from new switch (4) to wires (5) in door jamb with new
6.
electrical splice (6).
2-166
