TM 5-3610-287-24
2-52. REPAIR BLACKOUT LIGHT SYSTEM (CONT)
WARNING
ELECTRICAL HAZARD. Turn off power to blackout light system
by setting blackout lights switch to off before repairing.
Failure to observe this warning may result in death or
serious injury.
Set BLACKOUT LIGHTS switch to OFF.
1.
Remove thumbscrew (1). Remove blackout light cover (2) and foam
2.
gasket (3) from blackout light assembly.
3.
Remove lens (4) from marker light (5) by inserting flat-tip
screwdriver into slot and gently twisting.
Remove bulbs (6) by pressing in and turning.
4.
2-164
