TM 5-3610-287-10
Troubleshooting (Cont)
Table 3-1.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4.
RESISTANCE (BINDING) FELT WHEN EXPANDING SIDES ARE RETRACTING (CONT)
Step 5.
Check that sides are retracting evenly.
If malfunction still exists, notify your supervisor.
5.
FOLDING FLOOR DOES NOT FIT.
Step 1.
Check that expanding sides are fully expanded.
Expand sides (para 2-6c).
Step 2.
Check for obstructions under front lip of folding floor.
Remove obstructions.
Step 3.
Check inclinometers to see if Section is level.
Level Section (para 2-6a, steps 6 thru 11).
If malfunction still exists, notify your supervisor.
6.
BOARDING LADDERS WILL NOT MOUNT ON DOORS FOR TRANSPORT.
Check mounting brackets on boarding ladder for proper adjustment.
Adjust boarding ladder mounting brackets (para 3-12).
If malfunction still exists, notify your supervisor.
7.
AUXILIARY PUMP MOTOR DOES NOT TURN.
Check that power cord is plugged into 120 VOLT OUTLET on
Step 1.
power entry panel.
Plug in power cord.
Check that OUTSIDE RECEPTACLE circuit breaker is turned ON.
Step 2.
Reset circuit breaker.
If malfunction still exists, notify your supervisor.
