TM 5-3610-287-10
3-5.
FLUORESCENT LIGHT MAINTENANCE INSTRUCTIONS (CONT)
WARNING
ELECTRICAL HAZARD. Turn off power to light fixture before
replacing fluorescent light. Failure to do so could
result in death or serious personal injury.
Turn off power to light fixture (1).
1.
2.
Release two latches (2) and open diffuser door (3).
If present, remove safety tab (4) from fluorescent light socket (5).
3.
4.
Rotate fluorescent lamp (6) to free prongs (7) from fluorescent light
socket (5). Remove fluorescent lamp (6).
Insert prongs (7) of new fluorescent lamp (6) into fluorescent light
5.
socket (5) and secure fluorescent lamp by rotating 90 degrees.
If available, insert safety tab (4) into fluorescent light socket (5).
6.
7.
Close diffuser door (3) and secure with two latches (2).
8.
Turn on power to light fixture (1).
BLACKOUT LIGHT MAINTENANCE INSTRUCTIONS
Repair
This task covers:
INITIAL SETUP
Tools
Cross-tip screwdriver (appendix B, section III, item 21)
Materials/Parts
Blackout light bulb (appendix D, item 24)
Twist/lock light bulb (appendix D, item 26)
3-9
