Figure 2-170.
TM 5-3610-286-20
(3) Impression ON cam disassembly.
(a) Remove key (1, figure 2-170) and slide roller lever (2) off drive shaft (3).
(b) Remove pin (4) and associated spring rod assembly from roller lever (2).
(c) Remove compression spring (5) from spring rod (6).
(d) Remove spring tension pin (7) from rod head (8) and remove rod head from spring
rod (6).
(e) Remove needle bushing (9) from rod head (8).
(f) Remove spring tension pin (10), roller shaft (11), and ball bearing (12) from roller
lever (2).
(g) Remove socket-head screw (13), plate (14), and shims (15) from roller lever (2).
(h) Remove needle bushing (16) from roller lever.
2-369
