Figure 2-165.
TM 5-3610-286-20
2-69.
Impression Cylinder Control Mechanism (cont).
(c) Remove two oil lines (1, figure 2-165).
(d) Remove external retaining ring (2) and flat washer (3).
(e) Remove two screws (4) and two flat washers (5) securing studs (6) to side of press.
(f) Remove retaining ring (7) and washer (8).
(g) Remove stud (6) and impression OFF cam lever (9) and spring rod (10).
(h) Remove tapered pin (11) and slide double cam lever (12) off drive shaft.
(i) Remove stud (6), impression ON cam lever (13), spring rod (14), and shaft (15).
2-364