Figure 2-171.
TM 5-3610-286-20
2-69.
Impression Cylinder Control Mechanism (cont).
(4) Swing lever disassembly.
(a) Remove spring tension pin (1, figure 2-171) and separate hand rod support bolt (2)
from stud (3).
(b) Remove spring tension pin (4) from slide control lever (5).
(c) Remove stud (3) and compression spring (6) from control lever (5) and swing
lever (7).
(d) Remove shouldered stud (8) from control lever (5).
(e) Remove spring tension pin (9) and stop bolt (10) from control lever.
(f) Remove three spring tension pins (11) from
(g) Remove screw (14) and nut (15) from stop (16).
pull rod (12) and remove three pins (13).
2-370
