Figure 2-169.
TM 5-3610-286-20
2-69.
Impression Cylinder Control Mechanism (cont).
(2) Double cam disassembly.
(a) Remove screw (1, figure 2-169), flat washer (2), spacer (3), and bolt (4) from double
lever (5).
(b) Remove spring tension pin (6) from double lever (5).
(c) Remove pivot shaft (7) and ratchet pawl (8) from double lever (5).
(d) Remove pin (9) from ratchet pawl (8).
(e) Remove two needle bushings (10) from ratchet pawl (8).
(f) Remove needle bushing (11) from double lever (5).
2-368
