TM 5-3610-257-14
Table 4-2. TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged before
troubleshooting.
(a)
Remove power cord from duplex receptacle.
(b)
Remove two thumb-screws and remove densitometer from mounting bracket.
(c)
Remove fuse by pushing in fuse holder and turning holder to left.
(d)
Visually inspect fuse; if fuse filament is broken, replace fuse.
(e)
Mount densitometer into mounting bracket.
4-10.
MAINTENANCE PROCEDURES. Operator maintenance is limited to regular preventive maintenance checks and
services and replacing of a fuse.
4-15
