TM 5-3610-253-14
c.
Loosen the return spring fully by rotating adjusting nut to the left.
d.
Remove snap ring from spring shaft retaining pin.
e.
Remove spring mounting bars and defective spring with attached hardware
from push bar.
f. Unscrew defective spring from threaded rod.
Screw new spring onto threaded rod.
g.
h. Reinstall spring mounting bars to push rod and secure with retaining pin
and snap ring.
Reinstall spring mounting bars, spring and attached hardware onto push
i.
bar.
Thread the other end of spring to the adjusting rod.
j.
Rotate adjusting nut to the right the same number of turns it was
k.
loosened in step c.
l.
Reinstall rear electronics enclosure cover.
5-435
