TM 5-3610-253-14
o.
Loosen locknuts on underside of motor adjusting mount.
NOTE
Turning bolts right tightens belt.
Turn adjusting bolts until proper tension is obtained. Be sure to turn
p.
both bolts the same amount each time.
Tighten locknuts on underside of motor adjusting mount.
q.
Reinstall inner V-belt cover.
r.
Reinstall main drive V-belt cover.
s.
Place operator key back into safety lock.
t.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
19 mm Combination Wrench
SUPPLIES: Main Drive Motor
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
Turn off power.
a.
(1) Turn Star-Delta switch to Y position, then to O position.
(2) Turn main power switch to O position.
(3) Using operator key, lock safety lock and keep key in your
5-426
