TM 5-3610-253-14
b. Perform steps b. through g. of paragraph 5-36.4 to remove V-belts.
Remove electrical box cover on motor and tag and disconnect wiring.
c.
Remove conduit connector and conduit from electrical box on motor.
d.
Place blocks of wood under motor as close as possible to motor's height.
e.
Remove mounting bolts and defective motor.
f.
Install new motor and secure in place with mounting bolts.
g.
Reinstall conduit and conduit connector to electrical box on new motor.
h.
Reconnect wiring to new motor.
i.
Perform steps h. through t. of paragraph 5-36.4 to reinstall V-belts.
j.
5-427
