TM 5-3610-253-14
Table 5-21.
ORGANIZATIONAL TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
10. CLAMP MOVES DOWN TOO SLOWLY DURING CUTTING CYCLE.
Check for loose or leaky connections in the hydraulic system.
(a) If loose or leaky, retighten connections.
(b) If malfunction persists, refer to direct/general support
maintenance.
11.
ROUGH FOOT PEDAL MOVEMENT.
Check foot pedal cams for wear or looseness.
(a) If loose, adjust foot pedal cam (paragraph 5-36.18).
