TM 5-3610-253-14
(3) Insert the alinement pin in through the side rakes. Tap pin into place
to be sure side rake is properly positioned.
(4) Tighten locking bolts.
Turn Star-Delta switch to Y position and then to O position.
u.
Turn main power switch to O position.
v.
Using operator key, lock the safety lock.
w.
Turn off circuit breaker.
x.
5-26.3 Preparation For Movement.
Prior to moving this section, place the false clamp onto the clamp.
OPERATION UNDER UNUSUAL CONDITIONS.
This equipment is designed for operation only in a controlled environment,
OPERATOR MAINTENANCE
Section VIII
This equipment does not require lubrication at the
operator level of maintenance.
5-29. TROUBLESHOOTING PROCEDURES.
a. The table lists the common malfunctions which you may find during operation or
maintenance of the paper cutter, or its components. You should perform the test/
inspections and corrective actions in the order listed.
b. This manual cannot list all malfunctions that may occur, nor all test or
inspections and corrective actions. If a malfunction is not listed or is not
corrected by listed corrective actions, notify your supervisor.
