TM 5-3610-253-14
Remarks
Material
Pressure in Kg
1000 - 1500
False clamp
Bible Paper
False clamp
1500 - 2000
Felt Paper
2000
Printing Paper (normal)
2000 - 2500
Writing Papers
1500 - 2000
Felt Board
False clamp
Grey Board
2500
2500
Post Card Board
k.
Insert false clamp if necessary.
l.
Set clamp pressure.
m.
Press clamp foot pedal and clamp paper.
n.
Press both cutting buttons (simultaneously) and perform cut.
o. After the knife has returned to its upper position, release the cutting
buttons.
Release the clamp foot pedal.
p.
Remove cut paper.
q.
r . Check to be sure that cut is clean with no burned, over or under cuts, or
draw.
s.
To perform additional cuts, repeat steps g. - r.
t.
If the backgauge rakes were set at different lengths, reset them as follows:
(1) Loosen the locking bolts.
NOTE
It may be necessary to remove the locking bolts and place them in another
hole to obtain proper alinement.
(2) Reposition the side rakes so that all rakes are alined.
5-358
