TM 5-3610-253-14
h.
Remove screws attaching HP card to mounting panel and remove defective
card.
i.
Insert new card on panel and attach with mounting screws.
Remount HP panel on mounting bolts and secure with nuts.
j.
k.
Reconnect power cables and cable connections. Be sure that number on
connector matches number on card. Set HP circuit breakers by pressing
reset buttons.
l.
Reinstall HP card cover panel.
m.
Reinstall front electronics enclosure cover.
n.
Turn on circuit breaker.
MOS: 35E, Special Electronic Devices Repairer
TOOLS: Flat Tip Screwdriver
SUPPLIES: Plug-in PC Card
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
Turn off power.
a.
(1) Turn main power switch to O position.
(2) Using operator key, lock safety lock and keep key in your
b.
Remove front electronics enclosure cover.
5-254
