TM 5-3610-253-14
Remove four mounting bolts securing clamp cylinder housing and remove
o.
defective clamp cylinder and housing.
Remove pipe from clamp cylinder.
p.
NOTE
Note position of clamp cylinder as mounted in the housing before removal.
Remove four socket head screws and defective clamp cylinder from
q.
housing.
Mount new clamp cylinder to cylinder housing, using new gasket.
r.
Reconnect pipe to clamp cylinder.
s.
NOTE
This step will require the use of three persons. Have one person under
the backgauge table, one at the front of the cutter, and one at the side
to help pull and guide the cylinder in place.
It may be necessary to loosen the pipe on top of the clamp cylinder to
ease installing the cylinder.
It may be necessary to use the knife carrying handles to aid in alining
the mounting bolt holes.
Reconnect clamp cylinder and housing to right pillar using new gasket.
t.
5-249
