TM 5-3610-253-14
Table 5-8. ORGANIZATIONAL TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. MACHINE DOES NOT CUT THROUGH MATERIAL - Cont
Step 2.
Check main motor V-belts for proper tension.
(a) If V-belt is out of adjustment, perform V-belt adjustment
for a 10 mm (3/8 in. ) deflection (paragraph 5-14).
(b) If not, proceed to step 3.
Step 3.
Check main motor V-belts for fray or wear.
(a) If frayed or worn, replace V-belts (paragraph 5-16.4).
(b) If not, proceed to step 4.
5-103
