TM 5-3610-253-14
WARNING
Serious injury may occur if inadequate number of personnel are used to
move the backgauge table and side wall. This equipment weighs 1000 lbs.
(7) Lift the hoist and remove the backgauge table and side wall from the
crate.
(8) Remove nuts and bolts on side wall that are securing table to side wall.
Then remove side wall.
(9) Remove two short side walls.
(10) Remove backgauge from crate.
(11) Carefully set the backgauge table down flat on to floor so that the table
rests on the wood blocks attached to table.
(12) Fix hoist to main frame and apply tension on the hoist.
(13) Remove nuts on the frame pillars and push down the bolts.
WARNING
Serious injury may occur if an inadequate number of personnel are used to
move the paper cutter. This equipment weighs 3600 lbs.
(14) Remove main frame from crate and position onto mounting frame. Using a
level, be sure that the frame is level.. If necessary, place shims under the right
or left pillar as needed. Then secure in place with mounting bolts.
(15) Check carefully that all parts have been removed from the box.
5-90
