TM 5-3610-253-14
Set clamp pressure.
j.
WARNING
q Be sure personnel and foreign materials are clear of the cutting and
clamping area before pressing the cutting buttons. Death or serious
injury may occur.
q Always keep the largest area of the material beinq cut behind the knife.
If the larger area is in front of the knife, it could fly up and serious
injury may occur.
k. Press clamp foot pedal and clamp paper.
1.
Press both cutting buttons (simultaneously) and perform cut.
m. After the knife has returned to its upper position, release the cutting
buttons.
n.
Release clamp foot pedal.
o.
Remove cut paper.
Check that cut is clean with no burned, over or under cuts, or draw.
P.
To perform additional cuts, repeat steps e through p.
q.
5-58
